Some ideas to ensure the most accurate measurement results

When testing moisture in any material whether it is wood, drywall, hay, cereals, soil, paper, cigarettes, or anything else, it is important to ensure that you can get the measurement result of moisture as accurately as possible.

So how to get the most accurate value? In this article, I will give you some tips on how to correctly measure for those who want to know about this issue. Let’s start.

What is moisture content

The definition of moisture is the amount of water in an object relative to its mass. Humidity often directly affects the quality and overall safety of different materials and products, so it often needs to be strictly controlled. 

Moreover, The results of the hygrometer are extremely important. Because it decides how to properly store materials and objects afterward. For example, when you test the moisture of a wooden board, the result is 14 percent, but the actual humidity is 20 percent. That prevents you from offering proper maintenance. The wood will be wet and moldy, quickly damaged.

Therefore, it is important to get the most accurate and reliable humidity measurement possible. 

How to get the best moisture test results

Use the best moisture meter which has been calibrated to suit each material type

If you want to get accurate measurements of humidity, it is important to use a moisture meter that is calibrated specifically for that material. Because the accuracy of the hygrometer depends on the physical properties of the material being tested. Therefore, each hygrometer must be calibrated for a specific material. In fact, you see on the market there are different types of hygrometer because of that.

In addition, each machine offers a different scale. For example,  A soil moisture meter will perform a pH reading, while a wood moisture meter will give values on a wooden scale. Therefore, when choosing to buy a hygrometer, You must determine the type of material to be measured to be able to match the humidity index.

Keep the moisture meter in good condition

Like the process of preserving other carpentry tools such as hand saws, wood chisels, etc. The hygrometer needs to be stored in an appropriate environment. If you have the right storage method, that will maintain the durability of the meter for a long time and always be accurate. However, the process of taking care of a moisture meter may vary depending on the type used.

Some tips on how to take care of a moisture meter

Regularly clean the area where you measure: The status of the environment used to conduct the test has a significant impact on the accuracy of the result. Cleaning is necessary to help prevent damage to the test conditions. If the device to check for the moisture is too corrosive, you need to waste some money to replace it. With a pin-type meter, the pins for analysis are often quite easy to replace if they are cracked or corroded. For pinless meters, you need to replace their scanners if they rust.

Never use a meter if it does not have enough power to measure an exact result: A low battery may not produce a stable current for the moisture meter, eventually causing damage and making the meterless accurate. Therefore, you should routinely monitor the battery between uses and quickly recharge them when the battery power is too low. That could be the solution to maximizing the life and accuracy of any moisture meter.

Storage: Preserving your moisture meter from outside factors is important to ensure that it will continue for as long as possible. Keep your moisture meter in a guarding case (which you come with when buying) to defend your device from unexpected impacts such as bumps, drops, or getting wet while you move from place to place. This assists keep the hygrometer in its best condition and can be used right away when you need it.

Attention, Although how well preserved, it still can be damaged at any time if not careful. Nothing can be 100% guaranteed.

Consider the type of moisture meter 

There are two common types of moisture meter on the market:  pinless – type and pin-type meter. 

Pinless – type meters are great at scanning large areas quickly and without destroying the objects you measure. 

A pin-type is better at determining moisture in an entire material and can check for moisture on uneven surfaces that a pinless meter cannot do. However, it is the minus point is to leave a mark on the object. 

Therefore, To take the outstanding features of these two machines, many users have combined the two types to measure the most accurate results.

In conclusion

I have given some tips to help you get the most accurate moisture measurement. Hopeful, they are useful for you. And thanks for taking the time to read this article.

Replies: 0 / Share:

You might also like …

Post Comment